Mould is the enemy and knowing where it is, and in what quantities, should be your priority when battling mould. After all, knowing is half the battle.
Toxic mould is the war you want to win.
SAN-AIR is a company built on scientific mould expertise. The SAN-AIRtm DIY Test Kit will be able to tell you, within 5 days, the level of mould in your indoor air space, on your surfaces or in your water.
- Fast test results
- 2 test per dip slide ( 2 pack comes with 2 dip slides so possible 4 tests).
- Very easy to use
- Able to use the test to track where the worst areas are in the home.
- Can test Air, Surfaces or Water
The DIY mould and bacteria test kit will enable you to determine how bad the mould in your home is and where the worst spots are.
The test works over 5 days. After 5 days check the chart that is provided with the product and you will be able to see if you have low, medium or high levels of mould in your home. Make sure to take a photo of the test kit as well.
How many test kits do you need?
Read this to determine the closest scenario to your situation.
How to use the DIY Test Kit
It is a simple 4 step process:
1 - Take the tabbed piece out of the casing.
(Keep the casing, you will need it again in a moment)
2 - Gather a sample.
Press the sides of the dip slide of the tabbed piece on the surface or material you wish to measure for mould up to 1 minute. Then place the tabbed piece back into the casing and back into the box that it came in.
3 - Check each day for the next 5 days.
Place on a window sill that gets sunlight. If you have mould or bacteria, you will see spots starting to form that look red or furry. The longer it takes, usually means the lower the problem in your home.
4 - Read the results
We give you an easy-to-use chart to judge the result yourself. Once you see mould or bacteria growing, use the given chart to measure the extent of the growth and severity of the problem.
Once identified you can proceed to remove the problem; check out our range of mould removing products.
Note: Each individual casing and tab can only be used once, for a single measurement.
If you don't feel confident about running this test yourself, then please Contact Us today! We can quote to clean and test for you!